Echo 3HT™ Fluid
Overview
$100.00 – $450.00
When water won’t work, Echo 3 HT is the next step. For temperatures up to 350˚F (177˚C), Echo 3 HT is water soluble, leaves no residue and is compatible with a broad range of materials.
Advantages
- Broad operating range -30 °F to 350°F (-34°C to 177°C)
- Water soluble: easier to remove than most fluid ultrasonic couplants
- No “oil slick” when used where couplant may drip into a body of water.
- Lowest viscosity fluid that remains pumpable down to 35°F / 2°C
- Compatible with a broad range of materials including most metals, plastics and composites
- Good Surface wetting due to low surface tension and solvent properties.
- Slow Drying at ambient temperatures
Contains no glycerin which can interfere with subsequent penetrant inspection.
Environment and operator friendly – no formaldehydes, nitrates, nitrites or glycol ethers.
Minimal residue
Removal: Wipe with wet or dry paper or cloth rag or water wash.
| Operating Range | -30 °F to 350°F (-35°C to 176°C) |
|---|---|
| Viscosity | Fluid |
| Halogens and Sulfur | Less than 50 ppm |
| Packaging |
|
Related products
-
Fluid Selection Chart
View a pdf of the Echo Fluid Selection Chart.
-
Echo 6 HT™
- Low-cost silicone based high-temperature UT fluid
- Replaces plant-based oils (peanut and canola) and mineral oils
- Operating Range: -40° to 675°F (-40° to 357°C)
-
Echo 8 HT™ Fluid for AUT and Robotics
- Most universal AUT fluid
- Broadest operating range
- (-50 to 800ºF / -45 to 425ºC)
- Three viscosity grades
-
EchoFLOW™ Fluid
- Ideal fluid for cold environments
- Approved for use in critical environments
- Operating Range: -40 to 150°F (-40 to 65°C)
Reviews
There are no reviews yet.