EchoMix-Single-Powder-Couplant

EchoMiX® Single

Single packet powdered UT couplants provide an economical solution for travel, remote access inspections and storage limitations.

EchoMix Single is a new, one-part (one packet) powder, easily mixed in ambient water in five minutes, providing a strong, continuous coupling film that adheres well to vertical and overhead surfaces. Single mix packet, one step mixing.

Easiest mixing powder couplant

One packet

Less residue

Blue mixing tracer

Salt stable – will not thin with corrosion salts or in marine or highway environments

Fast, easy removal with water

Low toxicity and low environmental impact

Compact for shipping and storage

Easy mixing, fast gel time in ambient water

Operating Range: 32˚ to 120˚F (0˚ to 50˚C)

  • Viscosity: (4 liter mixture): 23,000 CPS, Brookfield #4 Spindle, 6 rpm
  • pH: 9
  • Corrosion Inhibition: Contains mild short term Ferrous Corrosion Inhibitors

Compliance:

  • ASME Boiler & Pressure Vessel Code (T-533)
  • NAVSHIPS 250-1500
  • FAA-AC # 25-29 (glycerin-free)
  • Less than 0.02% (200 ppm) Halogens & Sulfur

Working with EchoMix Single:

Removal: Remove with a dry rag, water and brush or pressure washer.

Air Bubbles: All powder couplants will form small air bubbles after mixing if water is not de-aired. These small bubbles usually do not negatively affect the use of the couplant and will dissipate in 3-4 days. If an air bubble-free couplant is desired immediately, use hot water and allow to stand overnight; then proceed with adding the powder couplant.

The Blue Color is a visual marker to ensure uniform distribution of the corrosion inhibitor by encouraging thorough mixing.

Easy to open and easy to use single powder packet that, when mixed with water, yields 1 gallon/4 liters.